Njoy Astris 5K/3P2T2 User Manual page 24

t
NOTICE
-The positive and negative terminals of PV modules can't connect
to PE wire(GND) , otherwise, the inverter will be damaged.
-Ensure that the voltage of each PV string doesn't exceed 1100V
under any circumstances.
-When the input voltage is 1000V to 1100V, the inverter will enter
the standby state.
-When the voltage returns to the MPPT operating voltage, namely
160V-1000V, theinverter will return to the normal state.
5.3.1 Preparation
Different PV module input configuration module table (All PV strings are
connected to the inverter in the corresponding groups number)
Before connecting the PV input to the inverter, ensure that the package
meets the following electrical specifications.
Inverter module
All
21
Limit of each input open-circuit
voltagew
1100V
Maximum allowable input
terminal current
20A