Table of Contents
Advertisement
SmartGuard-63A-(S0, AUS0)
User Manual
Appliance Settings
1. Connect a smart switch to the same router as the EMMA. For details, see the
quick guide delivered with the smart switch.
2. Open the FusionSolar app, choose Devices > Appliances, add the smart switch,
and set the parameters such as the PV power parameters and power consumption
priorities.
Connecting to Multiple Smart Switches
To avoid confusion when multiple smart switches are powered on at the same
time, power on and commission them one by one.
For example, if two smart circuit breakers (Shelly Pro 2PM) are installed in the
living room, perform the following steps:
1.
Table D-1 Recording the names of the smart switches
Shelly Pro 2PM
Living room 1
2.
3.
Issue 03 (2023-12-27)
NO TE
● The smart switches can work properly only when there are stable WLAN signals. If the
signals are unstable, the switches may fail to connect to WLAN or frequently go offline.
Different brands of smart switches may have different WLAN requirements. For details,
see the product manuals or contact your supplier.
● Before the installation, ensure that the home router can cover the position of the smart
switches with stable network connection, and perform the commissioning and
verification.
NO TE
In the SmartGuard networking scenario, Off-grid Load Control does not take effect for
smart appliances connected to non-backup power ports.
When installing the smart circuit breakers, record their positions by taking
photos and notes, and number them.
Power on the smart circuit breaker "Living room 1," search for it in the Shelly
app, and connect it to the router.
Log in to the FusionSolar app as an owner, search for it, and change its name.
Bind it to the corresponding load based on the actual cable connection.
Copyright © Huawei Digital Power Technologies Co., Ltd.
D Using Smart Appliances (Owner)
Shelly Pro 2PM
Living room 2
83
Advertisement
Table of Contents
