Table of Contents
Advertisement
SmartGuard-63A-(S0, AUS0)
User Manual
●
●
●
●
Mounting Structure Requirements
●
●
●
●
4.2.2 Clearance Requirements
Installation Clearance Requirements
●
●
Issue 03 (2023-12-27)
Install the SmartGuard in a well-ventilated environment to ensure good heat
dissipation.
You are advised to install the SmartGuard in a sheltered area or install an
awning over it.
Do not install the SmartGuard in a place with direct sunlight exposure.
Otherwise, the capacity may decrease or overtemperature protection may be
triggered.
It is recommended that the SmartGuard be installed beside the AC power
distribution box and be far away from the rest area. When the SmartGuard
performs on/off-grid switchover, a click sound is generated.
Ensure that the structure where the SmartGuard is installed is fireproof.
Do not install the SmartGuard on flammable building materials.
Verify that the surface on which the SmartGuard is installed is strong enough
to bear the weight of the SmartGuard.
In residential areas, do not install the SmartGuard on a drywall or wall made
of similar materials which have a weak sound insulation performance to avoid
disturbing residents.
Dimensions of mounting holes for the SmartGuard
Figure 4-1 Mounting bracket dimensions
Reserve sufficient clearances around the device for installation and heat
dissipation.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 System Installation
27
Advertisement
Table of Contents
