Table of Contents
Advertisement
SmartGuard-63A-(S0, AUS0)
User Manual
Cable tie
Heat gun
4.4 Pre-installation Check
Checking Outer Packaging
Before unpacking the product, check the outer packaging for damage, such as
holes and cracks, and check the product model. If any damage is found or the
model is not what you requested, do not unpack the product and contact your
vendor as soon as possible.
You are advised to remove the packing materials within 24 hours before installing
the product.
Checking Deliverables
After unpacking the SmartGuard, check that the deliverables are intact and
complete, and free from any obvious damage. If any item is missing or damaged,
contact your vendor.
4.5 Moving the SmartGuard
Put your hands on both sides of the SmartGuard, take the SmartGuard out of the
packing case, and move it to the installation position.
Issue 03 (2023-12-27)
Multimeter
Rubber mallet
NO TICE
NO TE
For details about the number of deliverables, see the
Copyright © Huawei Digital Power Technologies Co., Ltd.
Level
Vacuum cleaner
Packing List in the packing case.
4 System Installation
Heat-shrink
tubing
-
30
Advertisement
Table of Contents
