Huawei SmartGuard-63A-S0 User Manual page 23

SmartGuard-63A-(S0, AUS0)
User Manual
System Power in Off-Grid Mode
Table 2-2 SUN2000-(2KTL-6KTL)-L1
Parameter
Off-grid power
Charging
power from
grid to inverter
Table 2-3 SUN2000-(8KTL, 10KTL)-LC0
Parameter
Off-grid
power
Charging
power from
grid to
inverter
Issue 03 (2023-12-27)
NO TE
● indicates a power cable,
communication.
● If a charger is configured, the charger must be installed on a non-backup power port.
● The SmartGuard contains the EMMA. The EMMA can be connected to the router
through the FE or WLAN port. If WLAN is used, the router must be close to the
SmartGuard.
● If there is only one charger, it can be directly connected to the EMMA through the FE
port or connected to the router through the FE or WLAN port. If there are two chargers,
they must be connected to the router only through the FE or WLAN port. Do not
connect one charger to the EMMA and the other charger to the router respectively at
the same time.
● When the SG Ready heat pump provides 12 V power supply, the EMMA directly controls
the heat pump. When the SG Ready heat pump cannot provide 12 V power supply, the
EMMA controls the heat pump through an external relay.
● The EMMA allows smart switch devices (including smart sockets, smart circuit breakers,
and smart relays) to connect to the router through the FE or WLAN port.
NO TE
The maximum system power in off-grid mode depends on the ESS capacity and inverter
power. For details about how to configure the ESS capacity, see
Manual.
SUN
2000
-2KT
L-L1
2000
W
2200
W
SUN2000-8K-
LC0
8000 W
5000 W
Copyright © Huawei Digital Power Technologies Co., Ltd.
indicates a signal cable, and
SUN2 SUN20 SUN2
000-3 00-3.68 000-4
KTL- KTL-L1 KTL-
L1 L1
3000 3680 W 4000
W W
3000 3000 W 3000
W W
SUN2000-10
K-LC0
10,000 W
5000 W
2 Product Description
indicates wireless
LUNA2000-(5-30)-S0 User
SUN20 SUN2
00-4.6 000-5
KTL-L1 KTL-
L1
4600 W 5000
W
3000 W 3000
W
SUN2000-8K- SUN2000-10
LC0-ZH K-LC0-ZH
8000 W 10,000 W
5000 W 5000 W
SUN20
00-6KT
L-L1
5000 W
3000 W
17