Summary of Contents for AMP Lighting TuscanPro AHT-3517-B-BZ
Page 1
INSTALLATION & MAINTENANCE GUIDE ® Low Voltage Landscape Lighting ® TuscanPro Path & Area Light AHT-3517-B-BZ Help Hotline: 1-813-978-3900 • Mon-Fri 9am-6pm (EST) w w w. a m p l i g h t i n g . c o m...
Page 2
INSTALLATION & MAINTENANCE GUIDE ® TuscanPro Path & Area Light AHT-3517-B-BZ Important Safety Instructions: Read Before Installation This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
Page 3
Package Contents (1) Hat Parts Sold Separately (1) Decorative Arm Product Dimensions 11” 9” 3.5” Decorative arm sold separately 22.15” 9.6” customersupport@amplighting.com • 813.978.3900 –3–...
Page 4
INSTALLATION & MAINTENANCE GUIDE ® TuscanPro Path & Area Light AHT-3517-B-BZ Remove Stem Top Loosen the stem top Stem and remove it from the top end of the stem. Stem Install Decorative Piece (optional) Place the decorative piece onto the top end of the stem as shown.
Page 5
INSTALLATION & MAINTENANCE GUIDE ® TuscanPro Path & Area Light AHT-3517-B-BZ Remove Washer and Finial Loosen the finial and remove Finial the finial, coupler and washer Coupler from the stem top. Washer Stem Top Install Stem Top Place the stem top over the lamp and thread the stem top onto the stem.
Page 6
INSTALLATION & MAINTENANCE GUIDE ® TuscanPro Path & Area Light AHT-3517-B-BZ Install Hat Thread the hat onto the stem top and hand tighten until snug. Stem Top Install Stake Determine the desired location for mounting the stake mount. Hammer the stake into the ground until flange of stake is flush to grade.
Page 7
Install Stem to Stake Clear away an area in the ground at the wireway slot Stem on top of the stake. Lay the Wireway Slot luminaire pigtail into the wireway slot and secure the Pigtail stem onto the stake. Tighten until snug.
Need help?
Do you have a question about the TuscanPro AHT-3517-B-BZ and is the answer not in the manual?
Questions and answers