Installer manual Fleck 2850 NXT/NXT2 - Maintenance
9.4.6
Micro-switches replacement
Info
This procedure is valid for AC and DC motor assemblies.
1. Using a flat screwdriver, unscrew (2) and open the cover (1).
2. Open the controller (3).
3. Disconnect the microswitches (4).
4. Using a Phillips screwdriver, unscrew (5).
5. Remove and change the microswitches (4).
6. Reverse above procedure steps to rebuild.
NXT2
NXT
Ref. MKT-IM-031 / D - 16.01.2023
151 / 174