Valve On Tank Assembly - Pentair Fleck 2850 NXT Installer Manual

Installer manual Fleck 2850 NXT/NXT2 - Installation
Side mounted configuration example
A2727-63
61415-20
A-2816-63
5.6

Valve on tank assembly

1. Lubricate the seals with approved silicone grease.
2. Spin the valve (1) onto the tank (2), ensuring the threads are not cross-threaded.
3. Rotate the valve (1) clockwise and freely, without using force until it comes to a stop.
Info
This stop position is considered point zero.
4. Rotate the valve (1) clockwise from point zero to between ¼ turn and ½ turn.
Caution - material
Risk of damage due to excessive force !
Do NOT exceed 27 Nm of torque when installing the valve. Exceeding this limit may
damage the threads and cause failure.
48 / 174
2850 NXT/NXT2
BV1600:
60067-03
BV1700:
25453
BV1600:
18168(CW)
23473(HW)
BV1700:
18979(CW)
18980(HW)
Ref. MKT-IM-031 / D - 16.01.2023