Playback 3 Iii.ss Cscs Se Satiaasioaet Oditesacaceap Dnduvesewateada Ea Eend Davanens Ccte Sided Bua Ide Cu Ae Oandaudu Ordered Oeadines; Recording Sisi Ocdeceties Caasesatads Shtwaedeceuadedsoucagh Aonasee Sovedbit Suuatdeadeadv Ota Euddetact Cadae Sadvedeuagweua Soveaede - Pioneer VSX-D1S Operating Instructions Manual

Press the POWER switch to the ON position, and turn on the power
to the other audio components you wish to use.
REC SELECTOR INPUT SELECTOR
PLAYBACK
1. Use the INPUT SELECTOR switches to select the desired audio
program source.
INPUT SELECTOR
Program source
To listen to a tape on the cassette deck
{or DAT) connected to TAPE 1/DAT jack
To listen to a tape on the cassette deck
connected to TAPE 2 jacks
TAPE 1/DAT
TAPE 2 MONITOR*
To listen to audio components connected
to the LINE jacks.
To listen to compact discs
To listen to record
* If you select a music source other than TAPE 2, switch off the TAPE
2 MONITOR.
2. Operate the appropriate audio component to play back the program
source.
3. Adjust the volume and tone controls as desired.
© When listening to a monaural! source, turn the DSSS switch ON
to enjoy simulated stereo sound.
© Refer to page 35 for details concerning surround operation.
© Refer to page 36 for details concerning sound quality adjustment.
CENTER MONO OUT switch
If Center speakers are connected and you are listening with the
surround mode OFF (stereo mode), you can press the CENTER
MONDO OUT switch to output a combination of left and right channel
signals as monaural sound through the center speakers. This may
be desirable to fill out the middle of the stereo image. The CENTER
MODE MONO indicator lights to confirm operation.
32
<ARB1272>
Inside of the hinged panel
CENTER MONO OUT
'SESS. SSHHe DELS e@
RECORDING
You can record sound from TUNER LINE, CD, and PHONO on TAPE
1/DAT, or TAPE 2 cassette decks.
For TAPE 1/DAT, you can select the source with the REC SELECTOR.
RECORDING WITH TAPE 1/DAT
When not using the REC SELECTOR
3. Load the TAPE 1/DAT cassette deck (or DAT deck) with a tape
for recording.
4. Start recording on the TAPE 1/DAT cassette deck (or DAT deck).
5. Start playback on the component selected with the INPUT
SELECTOR switch.
When using the REC SELECTOR switch
With the INPUT SELECTOR switches, you can select a component and
a different recording source. For example, you can listen to a record
while recording a CD.
1. Select the source you want to record from (TUNER LINE, CD, or
PHONO) with the REC SELECTOR switches.
© The REC SEL indicator lights.
ra L He a ih c me
Whi am on
mac om Cee
2. Load the TAPE 1/DAT cassette deck (or DAT deck) with a tape
for recording.
3. Start recording on the TAPE 1/DAT cassette deck (or DAB deck).
4. Start
playback on
the component
selected with te
REC
SELECTOR switch.