Naming: A Station 3 C¢ Cic Eecociwcavastaveeganea Sive Seas Ae Snegeedecdepcavded Evugvexececascceapedsvavaeeseseuend Pdsedevesias - Pioneer VSX-D1S Operating Instructions Manual

NAMING A STATION
If desired, you may memorize station call-letters and display them. In
this case, use the call-letter mode.
Inside of the hinged panel
= SEARO CBE
—— co
5
Memorizing with the call-letter mode.
¢ A maximum of four characters can be memorized.
1. Press the DOOR OPEN switch to reveal the hinged panel.
2. Tune into a desired station, and preset in a STATION CALL switch.
© Refer to 'PRESET TUNING" for preset procedure.
® Stations already preset can be recalled with the STATION CALL
switches.
3. Press the STATION NAME switch.
4. Select the desired character with the JOG dial.
¢ Turning the JOG dial in a clockwise direction changes the
characters in the following order.
HAY oe UB! ee Ze OM et ee 1g"
4 ng gg nga ;
5. Press the MEMORY switch.
6. By repeating steps 4 and 5 up to four characters can be memorized.
7. Repeat steps 2 to 6 when naming other stations.
Returning to the TUNER display.
1. Use the JOG MODE switch to select "' Ms
2. Change the reception frequency with the JOG dial.
* The station display name will change to ''TUNER''.
30
<ARB1272>
Select CH 9 (Press once.)
@
:
AAR
STATION Go on and off
*|
(a)
©)
Go on and off
When one character is set.
6) Go on and off
a
Light ole Ue
Ag
MEMO
—
AR |
"lth
) QC) @
|
i
€
7
«|