Table of Contents
Advertisement
HITS (Hyper Intelligent Tuning System)
You can use the HITS function in the three following situations.
@ When inputting frequency numbers for DIRECT ACCESS TUNING:
If the HITS button is pressed during input of numbers for DIRECT
ACCESS tuning, the receiver sets the remaining digits which have
not yet been input to "0", searches for the corresponding frequencies,
and stops on the first station it finds.
a
=
A EE
S.<—<———————
ae
ee
pane
o
@ During frequency display:
¢ lf the HITS button is pressed at the currently displayed station
frequency, the receiver searches up and down the frequency for the
T
next station and stops at the first one it finds.
aaa
at"
(FM)
—1 MHz
+1 MHz
DIRECT
ACCESS
HITS
STATION CALL
5
Cc Zz
ma
@ When inputting a station name:
If the HITS button is pressed during station call-letter input and the
receiver performs a memory search for other stations in the STATION
CALL memory which begin with the same letter(s)
(one to four
characters) as those you have input (starting from the left). (Each is
tuned in for approximately 5 seconds. Press the HITS button to cancel.)
OPERATING THE AUDIO COMPONENTS
:
aati
Press the POWER switch to the ON position, and turn on the power
to the other audio components you wish to use.
INPUT ATT
INPUT
REC
SELECTOR
SELECTOR
29
<< ARB1332>
Advertisement
Table of Contents
