Vehicle Operation - CrimeStopper Super Rage CS-2011RS IV Series Operation Instructions Manual

2 VEHICLE OPERATION

The CS-2011RS Series IV system can be used for 2 car operation. A single remote can control two
independent vehicles with an identical systems installed.
See diagram below on how to switch your remote to car 2 operation. Follow the "Transmitter Programming"
steps on the second vehicle and learn YOUR remote, along with Car #2's existing remotes.
NEW Push-Button 2-Car method: Your remote may have a push-button on the side in place of a slide-
switch for 2-car operation. Please read the following: Your remote must be programmed to the second vehicle
first. Press the side button on your remote first, and within 3 seconds, press any of the 4 function buttons on
your remote. You can keep pressing function buttons to control car #2 as long as it is within the 3-second
window. After 3 seconds have elapsed, the remote will revert back to Car #1 control.
2-CAR OPERATION
CAR I
New
Slide
Push
Switch
Button
START
CAR II
14