Power Connection - UTStarcom CDM7025 User Manual

POWER CONNECTION

1.
Plug the AC Charger into a standard outlet.
2.
Plug the other end of the AC Charger into the charging port on your
phone. The battery must be installed onto the phone to work
properly.
• When you charge the battery with the phone power off, you will see a
Hot Key
charging status screen. You cannot operate the phone until it is powered
on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace the
battery.
BATTERY USAGE
(BATTERY CHARGING)
13