Set Mode - UTStarcom CDM7025 User Manual

SETTINGS
LOCATION
To set the location function:
1.
Press [Menu], then press
Press
2.
Select "Location On" or "E911 Only".
• Location On: Your location is now available to the network.
• E911 Only: Your location will be hidden from network & application except 911
3.
Press [Done] to save the setting.
• If you have set Lock Mode for Location to "Lock", you will need to enter
Note
your location lock code before you can enter this menu. The default value
is the last 4-digits number of the phone number.

SET MODE

To set the mode function:
1.
Press [Menu], then press
Press
2.
Select "Home Only", "Automatic A", or "Automatic B."
• Home Only: Only within your home area or home affiliated area.
• Automatic A: Scan the radio channels based on the Automatic A setting.
• Automatic B: Scan the radio channels based on the Automatic B setting.
3.
Press [Done] to save the setting.
70
"Phone Settings", then
"Phone Settings", then
for the "Settings" menu.
"Location".
for the "Settings" menu.
"Set Mode".