Power Connection - UTStarcom cdm7025US Manual

POWER CONNECTION

1.
Plug the AC Charger into a standard outlet.
2.
Plug the other end of the AC Charger into the bottom of your
phone. The battery must be installed onto the phone.
• When you charge the battery with the phone powered off, you will
TIP
see a charging status screen. You cannot operate the phone until
it is powered on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset powered
off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace
the battery.
BATTERY USAGE
(BATTERY CHARGING)
13