Battery Charging; Power Connection; Battery Talk Time; Battery Life Time (For New Battery) - UTStarcom CDM-8615 User Manual

BATTERY USAGE
C

BATTERY CHARGING

H
1

POWER CONNECTION

1
Plug the AC charger into a standard outlet.
2
Plug the other end of the AC Charger into the
bottom of your cellular telephone. The battery
must be attached to the cellular telephone.
• When you charge the battery with the phone turned off, you
will see a charging status screen. You cannot operate the
phone until it is turned on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset
turned off.
• The battery must be connected to the phone in order to
charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to
replace the battery.
12
BATTERY USAGE

BATTERY TALK TIME

The operating time is subject to your handset usage and configuration.
Battery Capacity PCS
STD 1000 mAh
Up to 190 m
EXT 1700 mAh Up to 330 m

BATTERY LIFE TIME (FOR NEW BATTERY)

The operating time is subject to your handset usage and configuration.
Battery Capacity CDMA
STD 1000 mAh
Up to 190 Hours
EXT 1700 mAh Up to 310 Hours
These times are for a new battery. Talking and Standby time may
decrease over time.
13
C
H
1
AMPS
Up to 80 m
Up to 130 m
AMPS
Up to 20 Hours
Up to 35 Hours