Battery Charging; Power Connection; Pcs And 1X Battery Times; Battery Life (For New Battery) - UTStarcom CDM 1080 User Manual

BATTERY USAGE
C

BATTERY CHARGING

H
1

POWER CONNECTION

1
Plug the AC Charger into a standard outlet.
2
Plug the other end of the AC Charger into the
bottom of your phone. The battery must be
installed onto the phone.
• When you charge the battery with the phone power off, you
will see a charging status screen. You cannot operate the
phone until it is powered on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset
powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace
the battery.
12
BATTERY USAGE

PCS AND 1X BATTERY TIMES

The operating time is subject to your handset usage and configuration.
DCS
Battery Capacity
STD 1000 mAh
Up to 207 minutes
Up to 282 minutes
EXT 1700 mAh

BATTERY LIFE (FOR NEW BATTERY)

The operating time is subject to your handset usage and configuration.
Battery Capacity DCS
STD 1000 mAh
Up to 190 Hours
EXT 1700 mAh Up to 326 Hours
• These times are for a new battery. Usage and Standby time
may decrease over time.
• Talk time for the standard battery: about 207 minutes.
Standby time for the standard battery: about 190 hours.
13
C
H
1
PCS
Up to 160 minutes
Up to 270 minutes
PCS
Up to 172 Hours
Up to 293 Hours