Charging The Battery; Power Connection; Do's; Don'ts - UTStarcom CDM8932 User Manual

CHARGING THE BA
CHARGING THE BA

POWER CONNECTION

1. Plug the AC charger into a standard outlet.
NOTE: 1. Fully charge the battery before using – it is
not charged when purchased.
2. It is more efficient to charge the battery with
the phone turned off.
Page 14 - Chapter 1
TTER Y
TTER Y
Charging is Charging is
in progress completed
BA TTER Y INFORMA
BA TTER Y INFORMA

Do's

l Only use the battery and charger approved by the
manufacturer.
l Only use the battery for its original purpose.
l Try to keep batteries in a temperature between
41 O F (5 O C ) and 95 O F (35
l If the battery is stored in temperatures above or
below the recommended range, give it time to
warm up or cool down before using.
l Completely drain the battery before recharging.
It may take one to four days to completely drain.
l Store the discharged battery in a cool, dark, and
dry place.
l Purchase a new battery when its operating time
gradually decreases after fully charging.
l Properly dispose of the battery according to local
laws.

Don'ts

l Don't attempt to disassemble the battery – it is a
sealed unit with no serviceable parts.
l Don't accidentally short circuit the battery by carrying
it in your pocket or purse with other metallic objects
such as coins, clips and pens. This may critically
damage the battery.
l Don't leave the battery in hot or cold temps.
Otherwise, it could significantly reduce the capacity
and lifetime of the battery.
l Don't dispose of the battery into a fire.
TION
TION
O C).
Chapter 1 - Page 15