Ignis 180 Controls, Connections And Mechanical Components - Fronius Ignis 150 TIG Operating Instructions Manual

Ignis 180 con-
trols, connec-
tions and mech-
anical compon-
ents
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
Use of the current connections during manual metal arc welding (depending on
electrode type):
-
-
Use of the current connections during TIG welding:
-
-
Control panel
(-) current socket
with bayonet latch
TIG Multi Connector
After connecting a remote control to the welding system
- 'rc' appears on the welding system display
- the welding current can only be adjusted using the remote control
(+) current socket
with bayonet latch
Carrying strap
Cable strap
for holding the mains cable and the welding power-leads
Do not use to move the device!
Mains switch
Air filter
Shielding gas connection
(+) current socket for electrode holder or grounding cable
(-) current socket for electrode holder or grounding cable
(+) current socket for grounding cable
(-) current socket for welding torch
(5)
(6)
(7)
(8)
(9)
23