Table of Contents
Advertisement
Troubleshooting
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger from electric current.
This can result in serious personal injury and damage to property.
▶
▶
▶
Danger due to insufficient ground conductor connection.
This can result in serious personal injury and damage to property.
▶
▶
Indicated errors
Overtemperature
"hot" appears on the display, the temperature indicator lights up
Cause:
Remedy:
Service mes-
When E and a 2-digit error number appear on the display (e.g. E02) and the 'Er-
sages
ror' indicator lights up, this is an internal welding system source service code.
Example:
48
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this device
and all system components.
WARNING!
Before starting work, switch off all the devices and components involved and
disconnect them from the grid.
Secure all the devices and components involved to prevent unintentional re-
starting.
After opening the device, use a suitable measuring instrument to check that
electrically charged components (such as capacitors) have been discharged.
WARNING!
The housing screws provide a suitable ground conductor connection for
grounding the housing.
The housing screws must not under any circumstances be replaced by other
screws without a reliable ground conductor connection.
Operating temperature too high
Allow device to cool (do not switch off the device - the fan will cool it
down)
Advertisement
Table of Contents
