Tig Comfort Stop - Fronius Ignis 150 TIG Operating Instructions Manual

TIG Comfort To activate and set the TIG Comfort Stop function, see the description
Stop meters for TIG welding
Operating principle and use of the TIG Comfort Stop:
1
1
2
3
4
5
Welding current and gas flow curve with TIG Comfort Stop function activated
36
starting on page 42.
2
Welding
During welding, raise the welding torch
-
the arc length is increased significantly
Lower the welding torch
- the arc length is decreased significantly
- the TIG Comfort Stop function is activated
Keep the welding torch at the same height
- the welding current continually decreases (DownSlope) until the arc goes
out
Wait for the gas post-flow time to finish and lift the welding torch away from
the workpiece
1
I
Max. A
70 A
(1)
3
2 3 4
t
down
Para-
4 5
+
+ 5
t
(2)