en
O
PERATION
3.4
Control temperature or heating
en-30
Automatic or manual control
•
Press briefly on button ≡ to switch the unit between auto-
matic ( A) and manual mode ( M).
Automatic temperature control
This temperature is measured at the unit's air inlet and may
deviate slightly from actual room temperature. The air intake
temperature is shown on the control panel next to the
symbol
Manual temperature control
In manual mode, heating can be set to full or reduced capac-
ity, or turned off.
•
Press button ▼ to reduce the heating setting by one level.
•
Press button ▲ to increase the heating setting by one
level.
c
Caution:
The highest heating level will only be switched on at
high fan speed.
C
A
C
OMFORT
IR
URTAIN
N