Table of Contents
Advertisement
en
S
ERVICE
en-38
6.2.2 Opening the unit
For free-hanging models (type F) and recessed mod-
els with electrical heating (types E-R) and models
without heating (types A-R)
1. Remove the front panel, if necessary.
2. Remove the inlet grille 4.
For cassette models (type C)
1. Push the inlet grille's left- and right-hand latches towards
each other. Use a screwdriver to do this.
2. Twist the inlet grille open and allow to hang freely.
3. Remove the inlet grille, if necessary, by opening the latches
on the other side.
C
A
C
OMFORT
IR
URTAIN
Advertisement
Table of Contents
