Table of Contents
Advertisement
INVISIDOR STYLE
Remote control Settings
Touch Controller with four default software Flag settings provide optional features detailed in Table 2.
If required, software Flag values can be changed by entering advanced settings as below.
With Controller ON, long press both Up and Down touchpad – 01 Flag menu displayed on screen. Tap
Home touchpad to detail Flag 01 Reset on powerup.
Follow instructions on LCD screen with:
•
Tap Speed touchpad to cycle Flags 1 to 4
•
Tap Up or Down touchpad to change selected Flag value.
Tap Home touchpad to confirm value.
FLAG
Feature
Reset on
1
power-up
2
Stop fan on cold
3
Never blow cold
Room air
4
temperature
control
Version 3.0
COMPACT AIR CURTAIN: Installation, Operation & Maintenance Instructions
2
Explanation
On restoring power after an
electrical interruption all Remote
Control settings are retained
Fans are switched off when heating
level is achieved (AUTO mode only)
Air curtain always heats in AUTO
mode
Enables the room air sensor in the
Remote Control
Default
Notes
WARNING! – Fans
start on their own
01
after power is
(ON)
restored
00
(OFF)
00
Will not go to
(OFF)
ambient mode
00
Disables all other
(OFF)
temperature sensors
Page | 17
Table 2.
Advertisement
Table of Contents
