en
I
NSTALLATION
en-28
-
If applicable:
external controls.
3. Turn on the power supply and/or put the plug in the socket
for all connected devices.
4. Start up the air curtain with the control panel.
5. Check that all connected appliances blow air across the
entire width of each appliance.
Models with water heating:
1. Check that the heat exchanger and control valve are con-
nected correctly.
2. Make sure that the central heating system is switched on.
3. Turn on the heating with the control panel.
4. Feel whether the blown air stream becomes warm at all
connected devices. This may take some time.
5. If necessary, vent the heat exchanger.
For models with electric heating:
1. Turn on the heating using the control panel.
2. Feel whether the blown air stream becomes warm for all
connected units, over the entire width of each device.
C
A
C
OMFORT
IR
URTAIN