DF M
ANUAL
2.9
Power on and check operation
Installation, Operating And Maintenance Manual version 1.0 (16-08-2023)
SIZE
TYPE
b
100-R
150-R
200-R
250-R
2. Attach the two angle sections 1 to the unit along the dis-
charge openings' edges using the screws supplied.
3. Extend the telescopic discharge grille 2 into the unit's dis-
charge opening until it reaches the required height.
4. Attach the discharge duct to the angle sections 1 using
the screws supplied.
c
Caution:
For the unit to work properly, it is essential that
there are sufficient openings in the alcove or ceiling
for air to enter the unit.
For all models:
1. Close all access panels.
2. Check the following connections:
-
power supply;
-
control cable(s) between control panel and unit(s);
I
NSTALLATION
DIMENSIONS
970 mm
1470 mm
1970 mm
2470 mm
en
en-27