KTM Freeride E-XC 2019 Owner's Manual page 89

Warning
Danger of accidents Unsuitable brake fluid damages the brake system.
DOT 5 brake fluid attacks seals and brake lines. DOT 5 brake fluid is silicone-based and purple in color.
–
Do not use DOT 5 brake fluid.
Note
Environmental hazard Hazardous substances cause environmental damage.
–
Dispose of oils, grease, cleaning agents, brake fluid etc. properly and in compliance with the applica-
ble regulations.
Info
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
A00201-10
Preparatory work
–
Deactivate the vehicle. (
–
Fold the seat up. ( p. 69)
–
Remove the KTM PowerPack. (
–
Mount the protection cap. (
–
Check the rear brake linings. (
Main work
–
Move the brake fluid reservoir attached to the left of the han-
dlebar to a horizontal position.
–
1
Remove screws .
–
2
Take off cover with membrane
–
A
Add brake fluid to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
Finishing work
–
Install the KTM PowerPack. (
–
Lock the seat. ( p. 69)
BRAKE SYSTEM 14
p. 43)
p. 107)
p. 71)
p. 88)
3
.
.
5 mm (0.2 in)
p. 137)
p. 108)
87