Table of Contents
Advertisement
Thomas can now use the WPS feature to establish a wireless connection between his notebook and the
Zyxel Device (see
the Zyxel Device (see
4.3.2 Using WPS
This section gives you an example of how to set up a wireless network using WPS. This example uses the
Zyxel Device as the AP and a WPS-enabled Android smartphone as the wireless client.
There are two WPS methods for creating a secure connection. This tutorial shows you how to do both.
• Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See
Section on page
• PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal
Identification Number) in the Zyxel Device's interface. See
method, since one device can authenticate the other.
Push Button Configuration (PBC)
Make sure that your Zyxel Device is turned on and your notebook is within the cover range of the wireless
1
signal.
Push and hold the WPS button located on the Zyxel Device's front panel for more than one second.
2
Alternatively, you may log into the Zyxel Device's Web Configurator and go to the Network Setting >
Wireless > WPS screen. Enable the WPS function for method 1 and click Apply. Then click the Connect
button.
Chapter 4 Tutorials
Section 4.3.2 on page
76). He can also use the notebook's wireless client to search for
Section 4.3.3 on page
76. This is the easier method.
VMG/XMG Series User's Guide
80).
Section on page
76
78. This is the more secure
Advertisement
Table of Contents
