Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 43 Network Setting > Wireless > WPS
LABEL
General
WPS
Add a new device with WPS Method
Method 1
WPS
Method 2
Register
Method 3
Release
Configuration
Generate
New PIN
Number
Cancel
Apply
7.6 The WMM Screen
Use this screen to enable WiFi MultiMedia (WMM) and WMM Automatic Power Save (APSD) in wireless
networks for multimedia applications. WMM enhances data transmission quality, while APSD improves
power management of wireless clients. This allows delay-sensitive applications, such as voice and
videos, to run more smoothly.
Click Network Setting > Wireless > WMM to display the following screen.
Chapter 7 Wireless
DESCRIPTION
Click this switch to activate or deactivate WPS on this Zyxel Device. When the switch turns blue
, the function is enabled. Otherwise, it's not.
Use this section to set up a WPS wireless network using Push Button Configuration (PBC). Click
this switch to make it turn blue. Click Apply to activate WPS method 1 on the Zyxel Device.
Click this button to add another WPS-enabled wireless device (within wireless range of the Zyxel
Device) to your wireless network. This button may either be a physical button on the outside of
device, or a menu button similar to the WPS button on this screen.
Note: You must press the other wireless device's WPS button within two minutes of
pressing this button.
Use this section to set up a WPS wireless network by entering the PIN of the client into the Zyxel
Device. Click this switch and make it turn blue. Click Apply to activate WPS method 2 on the
Zyxel Device.
Enter the PIN of the device that you are setting up a WPS connection with and click Register to
authenticate and add the wireless device to your wireless network.
You can find the PIN either on the outside of the device, or by checking the device's settings.
Note: You must also activate WPS on that device within two minutes to have it
present its PIN to the Zyxel Device.
Use this section to set up a WPS wireless network by entering the PIN of the Zyxel Device into the
client. Click this switch and make it turn blue. Click Apply to activate WPS method 3 on the
Zyxel Device.
The default WPS status is configured.
Click this button to remove all configured wireless and wireless security settings for WPS
connections on the Zyxel Device.
If this method has been enabled, the PIN (Personal Identification Number) of the Zyxel Device is
shown here. Enter this PIN in the configuration utility of the device you want to connect to using
WPS.
The PIN is not necessary when you use the WPS push-button method.
Click the Generate New PIN button to have the Zyxel Device create a new PIN.
Click Cancel to restore your previously saved settings.
Click Apply to save your changes.
VMG/XMG Series User's Guide
156
Advertisement
Table of Contents
