Table of Contents
Advertisement
Table 54 Network Setting > Home Networking > UPnP (continued)
LABEL
UPnP NAT-T
#
Description
Destination IP
Address
External Port
Internal Port
Protocol
Cancel
Apply
8.4.1 Turning On UPnP in Windows 7 Example
This section shows you how to use the UPnP feature in Windows 7. UPnP server is installed in Windows 7.
Activate UPnP on the Zyxel Device.
Make sure the computer is connected to a LAN port of the Zyxel Device. Turn on your computer and the
Zyxel Device.
Click the start icon, Control Panel and then the Network and Sharing Center.
1
Click Change Advanced Sharing Settings.
2
Chapter 8 Home Networking
DESCRIPTION
Click this switch to allow UPnP-enabled applications to automatically configure the Zyxel Device
so that they can communicate through the Zyxel Device by using NAT traversal. When the
switch goes to the right
UPnP applications automatically reserve a NAT forwarding port in order to communicate with
another UPnP enabled device; this eliminates the need to manually configure port forwarding
for the UPnP enabled application.
The table below displays the NAT port forwarding rules added automatically by UPnP NAT-T.
This is the index number of the UPnP NAT-T connection.
This is the description of the UPnP NAT-T connection.
This is the IP address of the other connected UPnP-enabled device.
This is the external port number that identifies the service.
This is the internal port number that identifies the service.
This is the transport layer protocol used for the service.
Click Cancel to exit this screen without saving.
Click Apply to save your changes.
VMG/XMG Series User's Guide
, the function is enabled. Otherwise, it's not.
186
Advertisement
Table of Contents
