Table of Contents
Advertisement
3 Scope of delivery
2.3 Warning and information signs
The following warning, notice and mandatory signs can be found on the product:
These markings must always be legible. They may not be covered, obscured, painted over, or removed.
2.4 Safety instructions for the electrical power supply
► Ensure that the power supply cable is not damaged, for example, by being driven over, crushed or torn.
► Check the power supply cable for damage and wear at regular intervals.
► If it is necessary to replace the power supply cable, use only ABICOR BINZEL spare parts.
► Only a qualified electrician should replace the power supply cable and the mains plug.
► Splash-water protection and mechanical stability must be ensured when replacing the mains plug of the
power supply cable.
2.5 Personal protective equipment
► Wear your personal protective equipment (PPE).
► Ensure that others in close proximity are also wearing personal protective equipment.
Personal protective equipment consists of protective clothing, eye protection, protective gloves, and safety
shoes.
2.6 Emergency information
► In the event of an emergency, immediately disconnect the following supplies:
— Electrical power supply
— Gas supply
► Extinguish burning oil or emulsions using a CO
3 Scope of delivery
The following components are included in the scope of delivery:
— 1× iROB
— 1× operating instructions for the iROB
— 1× "Safety Instructions" document
Optional:
— 1× iCOOL 1200 cooling unit (installed in the welding power source)
— 1× Wi-Fi router for using the iROB
— 1× driving carriage
— 1× base
— 1× operating instructions for the iCOOL 1200 Cooling unit
► Order the equipment parts and wear parts separately.
► The order data and ID numbers for the equipment parts and wear parts can be found in the current
catalog.
► For more information about points of contact, consultation, and orders, visit www.binzel-abicor.com.
Although the items delivered are carefully checked and packaged, it is not possible to fully rule out the risk
of transport damage.
Goods-in inspection
► Use the delivery note to check that everything has been delivered.
► Check the delivery for damage (visual inspection).
Complaints
► If goods are damaged, contact the final carrier.
► Keep the packaging for possible checks by the carrier.
EN - 6
► Read and observe the operating instructions.
®
401 AC/DC welding power source
®
401 AC/DC welding power source
®
POWER App control app
or powder fire extinguisher.
2
®
iROB
401 AC/DC
Advertisement
Table of Contents
