Emergency Information; Putting Into Operation - Abicor Binzel SR/ABITIGL ABITIG GRIP Operating Instructions Manual

Tig welding torches
Table of Contents

Advertisement

Available languages

Available languages

®
SR/ABITIG
/ABITIG

3.2 Emergency information

4 Putting into operation

®
GRIP
DANGER
Describes imminent threatening danger. If not avoided, it will result in fatal or
extremely critical injuries.
WARNING
Describes a potentially dangerous situation. If not avoided, it may result in
serious injuries.
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight
or minor injuries.
NOTE
Describes the risk of impairing work results or the risk that may result in
material damage to the equipment.
In case of emergency, immediately interrupt the Power and Gas. Further
measures can be found in the "Power supply" user manual or in the
documentation of further peripheral devices.
DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair
work, the following instructions must be adhered to:
• Switch off the power supply and disconnect the gas supply.
• Pull the mains plug.
NOTE
• The welding torch may only be put into operation by trained personnel.
4 Putting into operation
EN - 5

Advertisement

Table of Contents
loading

Table of Contents