Foxtech SYK-10 User Manual page 6

Introduction
EO/IR Dual Sensor & 10X Optical Zoom
SYK-10 AI-TIRM is equipped with a high-precision 3-axis gimbal, featuring a 10x optical zoom
camera and a 640x512 thermal imaging camera. It is capable of capturing visible light and thermal
imaging simultaneously, providing more detailed and comprehensive images.
5-1200 m Laser Rangefinder
SYK-10 AI-TIRM camera is also equipped with a laser rangefinder, which provides distance and
positional coordinates of observed targets, assisting in rapid and precise positioning and
improving operational efficiency.
AI Identification and Tracking
SYK-10 AI-TIRM camera is equipped with AI intelligent recognition and military-grade tracking
capabilities. The gimbal can intelligently identify human and cars within the captured images and
continuously lock and track any selected target.
Multiple Mounting Options
SYK-10 AI-TIRM camera supports both upright and inverted installations, allowing for quick and
tool-free attachment to various UAVs or other carrier platforms.
Control & Display Software
The control and display software supports real-time display of the footage on a computer and
enable control over the gimbal. It also supports functions such as capturing photos and recording
Characteristics
videos.
Features AI multi-object detection and tracking, which can constantly track
one of the persons and vehicles intelligently identified in the image.
Carries a 30x zoom camera, a thermal camera and a laser range finder.
Low-profile spherical shape and 3-axis nonorthogonal mechanical stabilized
structure, minimize the gyration radius and the wind resistance of the gimbal.
The
SYK-10 AI-TIRM
With the GCU, the SYk-1
supports both private protocol and MAVlink protocol.
Thanks to the Dual-IMU complementary a
control and carrier AHRS fusion, the SYK
±0.01° .
Can be mounted onto multiple carriers, whether downward or upward.
With the GCU and the Dragonfly software, user can watch the image and
control the gimbal without protocol ducking.
Screen supports overlaying OSD information such as latitude, longitude and
altitude. Image supports shooting point coordinate EXIF save. (EXIF save is not
supported temporarily and will be supported by firmware updating)
14~53 VDC wide voltage input.
is able to spin continually around its yaw axis.
AI
supports network, UART and S.BUS control. The GCU
AI
l g o r i th m
r o v id e
A I
-10
1
User Manual
s w i t h IM U t e m p e ra
s a s t ab ili za t i on a c c
t u r e
u r a cy at