Memory Dialing (Base Only) - Uniden DCT6485 Series Owner's Manual

Memory Dialing (base only)

note
•The 10 memory
locations in the base
are independent from
the handset.
•If you have not
pressed any key for
30 seconds, the phone
returns to standby
mode.
[ 4 4 ] P H O N E B O O K
You can store 10 phone numbers in the base, and make
calls with memory dialing from the base.
Storing Phone Numbers
1) Press memory in standby mode.
2) Enter the number you wish to store. (The number
cannot exceed 20 digits.)
3) Press memory. Enter the memory location number (0-9)
on the keypad.
You will hear a confirmation tone.
Making Calls with Memory Dialing
1) Press (speaker) in standby mode.
2) Press memory. Enter the memory location number (0-9) to dial the number.
Deleting the Stored Data
1) Press memory in standby mode.
2) Press memory again.
3) Enter the memory location number (0-9) you wish to delete.
You will hear a confirmation tone.
w w w . u n i d e n . c o m