Low Battery Alert - Uniden DCT6485 Series Owner's Manual

2.4 expandable digital spread spectrum
Hide thumbs Also See for DCT6485 Series:
Table of Contents

Advertisement

Low battery alert

When the battery pack is very low and need to be charged, the phone is programmed to
eliminate functions in order to save power.
The battery pack needs to be charged when:
- The empty battery icon appears.
-
appears in the display.
Lo w B at t er y
If the phone is in standby mode, none of keys will operate.
If you are on a call, complete your conversation as quickly
as possible, and return the handset to the cradle.
Cleaning the battery charging contacts
To maintain a good charge, it is important to clean
the charging contacts on both the handset and the
base unit once a month. Using water only, dampen
a cloth to clean the charging contacts. Then make
sure to go back over the charging contacts with a
dry cloth before returning the handset to the base
to charge.
Caution: Do not use paint thinner, benzene, alcohol,
or other chemical products. Doing so may discolor the
surface of the telephone and damage the finish.
w w w . u n i d e n . c o m
note
•Even when the battery
pack is not being used,
it will gradually
discharge over a long
period of time.
For optimum
performance, be sure
to return the handset
to the base unit after a
telephone call.
•Standby Mode -
The handset is not in
use and talk/flash
has not been pressed.
•Talk Mode -
The handset is not in
the cradle and talk/
flash or speaker has
been pressed enabling
a dial tone.
appears on the display.
G E T T I N G S T A R T E D [ 1 3 ]
Ta l k

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dct6485-2 seriesDct6485-3 series

Table of Contents