4-Way Conferencing; Intercom/Call Transfer Feature - Uniden DCT6485 Series Owner's Manual

4-Way Conferencing

note

Intercom/Call Transfer Feature

•If the party is busy or
out of range, the
handset returns to
standby mode.
•If any of the following
occurs while selecting
the other handset
(or the base), the
operation will
be canceled.
- Press talk/flash
or speaker.
- Receive an outside/
intercom call or page.
•When the party does
not answer within one
minute, the operation
is canceled.
•Standby Mode -
The handset is not in
use and talk/flash
has not been pressed.
[ 6 8 ] E X P A N D I N G Y O U R P H O N E
Fourth person, at either the handset or the base, may be added to the conference call. For
example, to add a fourth party to an ongoing conference call at the base or another handset,
press talk/flash on the fourth party's handset (or
caller from your conversation, press end on the party's handset (or
The other parties will still be connected to the call.
Intercom and Call Transfer features are available for your phone.
Intercom
From handset to handset or to the base
1) Press hold/transfer/int'com in standby mode.
2) Select the base or the handset you want to talk with
from the selection list within 30 seconds. To select the
handset (or the base), press ring/vol/∧ or ring/vol/∨,
and then press select/
and the base will be paged. An intercom tone sounds.
3) On the receiving handset (or the base), to answer the call, press talk/flash or hold/
transfer/int'com (or intercom or
tone/←, or #/→ (when Any Key Answer is on), or pick up the handset from the cradle
(when AutoTalk is on).
4) To hang up the intercom call, press end on either handset (or intercom on the base).
. If you select A l l , all handsets
on the base). Or press any number key,
(speaker)
on the base). To remove either
(speaker)
(speaker)
w w w . u n i d e n . c o m
on the base).
/
*