Table of Contents
Advertisement
* To repeat a message, press 0 then 1 within about four seconds to repeat the previous
message, or press 0 then 1 after about four seconds to repeat the current message.
** For the Memo Record and Greeting Message Record functions, the first time you enter the
corresponding command, it starts the Recording function. If you want to stop the
recording, press 0 then 7, 8, or 5.
5) After the command has finished, you hear intermittent beeps indicating that the system
is in the command waiting mode. You may enter another command at this time from the
chart above.
6) When you are finished, hang up to exit the system. The answering system automatically
returns to standby.
Remote access with the handset
You can operate your answering system from another room using a handset.
1) When the phone is in standby mode, press select/
M ach ine o pera tion
current time and the number of messages stored in the memory.
Messages will be played in the order in which they were received. The time and day that
each message was received is announced after the message is played.
2) You hear "To play incoming messages, press two. For help, press zero."
You will hear a beep.
3) Enter a command within 30 seconds, each command there after must be entered within 2
seconds. You may select a command from the following chart:
w w w . u n i d e n . c o m
appears on the handset display. The answering system announces the
on the handset.
R e mo te A n sw er i ng
T H E I N T E G R A T E D A N S W E R I N G D E V I C E [ 6 3 ]
note
•When you receive a
call, the remote
operation is canceled.
•When another handset
or base make a call,
the remote operation
is cancelled.
•During the remote
operation " -- " appears
on the base.
•If you have new
messages and old
messages, only the
new messages will be
played. After you have
reviewed your new
messages, you can play
your old messages by
again pressing 2.
Advertisement
Table of Contents
