Register The Handset To The Base - Uniden DCT6485 Series Owner's Manual

Register the Handset to the Base

note
•An extra handset can
be registered when
the main base is in
standby mode.
•Standby Mode -
The handset is not in
use and talk/flash
has not been pressed.
[ 6 6 ] E X P A N D I N G Y O U R P H O N E
If you purchase an extra handset, you need to register the handset to the base before
use. Only one handset can be registered at a time.
The handset ID for the supplied handset(s) was assigned by
the factory. Factory-registered handset have Handeset #1,
#2 or #3 in the display (#2 for models that have two
handsets in packaging, and #3 for models that have three
handsets in the packaging). When you register additional
handset to the base, the handset ID will be assigned.
1) Before registering the extra handset, the
battery pack MUST be charged for 15-20
hours.
2) Place the extra handset in the main base
unit to begin registration.
3) While the handset is registering,
will appear in the LCD.
R e gi st e ri n g
When
R eg i st r at io n C o mp l et e
the handset has been registered to the base.
If
Re gi s tr a ti o n F a il e d
these steps again.
1
Charge the handset
for 15-20 hours.
2
H an d se t
Place the extra
is displayed,
handset in the main
base to register.
appears, please try
Extra Handset
3
Extra Handset
Charger
Extra Handset
Main Base
+
Main Base
w w w . u n i d e n . c o m
4
Charger