Flash And Call Waiting; New Message Led - Uniden DCT6485 Series Owner's Manual

Flash and Call Waiting

note
You must subscribe
through your local
telephone company
to receive Call Waiting
or Caller ID on call
waiting service.

New Message LED

[ 3 6 ] B A S I C S
If you have Call Waiting service and a call waiting tone sounds
while you are on a call, press talk/flash on the handset (or
flash on the base) to accept the waiting call. There is a short
pause, and then you will hear the new caller. To return to the
original caller, press talk/flash on the handset (or flash on
the base) again.
The new message LED on the handset flashes when you have new messages in your
answering system. The LED stops flashing when all new messages are played back (see
"Using your Answering System" on page 59).
w w w . u n i d e n . c o m