Setting The Time; Setting A Pin Code - Uniden DCT6485 Series Owner's Manual

note
Time stamp will not be
heard until you have set
the time.
[ 5 4 ] T H E I N T E G R A T E D A N S W E R I N G D E V I C E

Setting the Time

Follow these steps to set the clock on the answering system to the correct time.
1) Press clock/MENU.
2) Press skip/SELECT or repeat/SELECT until the correct day is announced and the
corresponding number (from 1 Sunday to 7 Saturday) appears.
3) Press SET to select the day.
4) Press skip/SELECT or repeat/SELECT until you hear the correct hour setting.
The numbers 1 through 12 appear on the base as each hour is announced.
5) Press SET to select the hour.
6) Press skip/SELECT or repeat/SELECT until you hear the correct minute setting.
The numbers 0 0 through 59 appears on the base as each minute is announced.
7) Press SET to select the minute.
8) Press skip/SELECT or repeat/SELECT until you hear the correct AM or PM setting.
The message counter displays A or P.
9) Press SET to select the AM/PM setting.
A confirmation tone sounds, and the day and time you set are announced for your review.

Setting a PIN code

To play your messages from a remote location, you will need to enter a two-digit Personal
Identification Number (PIN) code ( - - ). To select a PIN code, perform the following steps:
1) Press clock/MENU twice. The current PIN code appears on the base and it is announced.
2) Press skip/SELECT or repeat/SELECT until the desired number appears. Press and hold
skip/SELECT or repeat/SELECT to quickly scroll through the numbers on the display.
3) Press SET to select the PIN code.
A confirmation tone sounds, the system announces the new PIN code.
w w w . u n i d e n . c o m