Table of Contents
Advertisement
PROGRAMMING THE REMOTE
CONTROL - VEHICLES WITH:
PUSH BUTTON START
You must have two previously
programmed remote controls inside your
vehicle and the new, unprogrammed
remote controls readily accessible. Contact
an authorized dealer to have the spare
remote control programmed if two
previously programmed remote controls
are not available. Make sure that your
vehicle is off before beginning this
procedure.
Make sure that you close all the doors
before beginning and that they remain
closed throughout the procedure. Perform
all steps within 30 seconds of starting the
sequence. Stop and wait for at least one
minute before starting again if you perform
any steps out of sequence.
Note: You can program a maximum of four
remote controls to your vehicle.
Note: If your programmed remote controls
get lost or stolen and you do not have an
extra coded remote, you need to have your
vehicle towed to an authorized dealer. Store
an extra programmed remote away from
your vehicle in a safe place to help prevent
any inconvenience. Contact an authorized
dealer to purchase additional spare or
replacement remote controls.
Read and understand the entire procedure
before you begin.
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Keys and Remote Controls
Programming Backup Location
E327286
1.
Place the first programmed remote in
the backup slot inside the center
console. With your foot off the brake
pedal, press and release the push
button ignition switch.
2. Wait five seconds and then press and
release the push button ignition switch
again.
3. Remove the remote control.
4. Within 10 seconds, place a second
programmed remote control in the
backup slot. Press and release the
push button ignition switch.
5. Wait five seconds and then press and
release the push button ignition switch
again. Keep the ignition on for at least
3 seconds, but no more than 10
seconds.
6. Remove the remote control.
7.
Place the unprogrammed remote
control in the backup slot and press
and release the push button ignition
switch.
76
Advertisement
Table of Contents
Troubleshooting
