Table of Contents
Advertisement
Note: The neutral (N) indicator on the
transmission selector may flash in this
mode.
EXITING TEMPORARY NEUTRAL
MODE
1.
Press the brake pedal.
2. Shift into park (P), or power your
vehicle on and shift into drive (D) or
reverse (R).
AUTOMATIC RETURN TO
PARK (P) - VEHICLES WITH:
ELECTRONIC SHIFT
HOW DOES AUTOMATIC RETURN
TO PARK (P) WORK
Your vehicle shifts into park (P) if you
attempt to exit your vehicle without the
vehicle in park (P).
Your vehicle shifts into park (P) when your
vehicle is stationary and any of the
following occur:
•
You switch the vehicle off.
•
You open the driver door with the driver
seatbelt unfastened.
•
You unfasten the driver seatbelt when
the driver door is open.
Note: Do not use automatic return to park
(P) when your vehicle is moving, except in
an emergency. See Starting and Stopping
the Engine (page 170).
AUTOMATIC RETURN TO PARK
(P) LIMITATIONS
Automatic return to park (P) may not work
if any of the following occur:
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Automatic Transmission
194
•
The driver door ajar sensor is
malfunctioning.
•
The driver seatbelt sensor is
malfunctioning.
See an authorized dealer if any of the
following occur:
•
Seatbelt indicator illuminates or tone
sounds with the driver seatbelt
fastened.
•
Door ajar indicator does not illuminate
with the driver door open.
•
Door ajar indicator illuminates with the
driver door closed.
•
Transmission not in park message
appears, with the driver door closed,
after you shift out of park (P).
BRAKE SHIFT INTERLOCK -
VEHICLES WITH: MECHANICAL
SHIFT
WHAT IS BRAKE SHIFT
INTERLOCK
Brake shift interlock allows you to shift
your vehicle out of park (P) in the event of
an electrical malfunction or emergency.
BRAKE SHIFT INTERLOCK
PRECAUTIONS
WARNING: Do not drive your
vehicle until you verify that the
stoplamps are working.
Advertisement
Table of Contents
Troubleshooting
