Table of Contents
Advertisement
MANUAL SEATS
HEAD RESTRAINT COMPONENTS
Rear Seat Outermost Head Restraints
E363853
The head restraints consist of:
A
An energy absorbing head
restraint.
B
Guide sleeve.
C
Locking guide sleeve.
Rear Seat Center Head Restraint
E363854
The head restraint consists of:
A
An energy absorbing head
restraint.
B
Two steel stems.
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Rear Seats
C
D
ADJUSTING THE HEAD
RESTRAINT
WARNING: The head restraint is a
safety device. Whenever possible it
should be installed and properly
adjusted when the seat is occupied.
Failure to adjust the head restraint
properly could reduce its effectiveness
during certain impacts.
WARNING: Adjust the head
restraints for all passengers before you
drive your vehicle. This will help minimize
the risk of neck injury in the event of a
crash. Do not adjust the head restraints
when your vehicle is moving.
Adjust the head restraint so that the top
of it is level with the top of your head.
The outermost head restraints are
non-adjustable.
Pull the center head restraint up to raise
it.
To lower the center head restraint:
1.
Press and hold the unlock and remove
button.
2. Push the head restraint down.
REMOVING THE HEAD RESTRAINT
1.
Fold the seat backrest forward before
removing the head restraint.
2. Pull up the head restraint until it
reaches its highest position.
151
Guide sleeve adjust and release
button.
Guide sleeve unlock and remove
button (If equipped).
Advertisement
Table of Contents
Troubleshooting
