Table of Contents
Advertisement
WHAT ARE THE AUXILIARY
SWITCHES
The auxiliary switchboard on the overhead
console makes aftermarket customization
easier with six prewired switches
connected to the power distribution box.
Each circuit is individually fused for
connection of electrical accessories.
For maximum vehicle performance, keep
the following information in mind when
adding accessories or equipment to your
vehicle:
•
When adding accessories, equipment,
passengers and luggage to your
vehicle, do not exceed the total weight
capacity of the vehicle or of the front
or rear axle (GVWR or GAWR as
indicated on the safety compliance
certification label). Ask an authorized
dealer for specific weight information.
•
It is your responsibility to ensure that
any equipment you have fitted
complies with applicable local
legislation.
•
An authorized dealer needs to install
mobile communication systems.
Improper installation may harm the
operation of your vehicle, particularly
if the manufacturer did not design the
mobile communication system
specifically for automotive use.
•
If you or an authorized dealer add any
electrical or electronic accessories or
components not produced by us to
your vehicle, you may adversely affect
battery performance and durability. In
addition, you may also adversely affect
the performance of the other electrical
systems in the vehicle.
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Auxiliary Switches
LOCATING THE AUXILIARY
SWITCHES
The switches are labeled AUX 1 through
AUX 6.
The auxiliary switches only operate when
the ignition is in the on or off position and
the delay accessory is active, whether the
engine is running or not
We recommend that you leave the engine
running to maintain battery charge when
using the switches for an extended time or
when using higher current draw
accessories.
When a switch is turned on, the indicator
light on the switch illuminates and the
circuit provides power to the device wired
to that switch.
E362433
Note: When your vehicle has a diesel
engine, use the auxiliary switches only the
ignition key is in the on position. Using the
auxiliary switches, even for limited amounts
of time, can cause your battery to drain
quickly and prevent your vehicle from
starting.
LOCATING THE AUXILIARY
SWITCH WIRING
There are three sets of blunt-cut sealed
circuits:
529
Advertisement
Table of Contents
Troubleshooting
