Key Buttons; Ringer Volume Switch; Ringer Pitch Switch; Speaker Volume Buttons - Uniden FP1220 Owner's Manual

KEY BUTTONS

1. Ringer Volume Switch

Set the ringer volume switch to the desired position (

2. Ringer Pitch Switch

Set the ringer pitch switch to the desired level (high or low).
The switch is located at the back of the unit.

3. Speaker Volume buttons

During the conversation, press VOL. + or VOL. - to adjust the
speaker volume (4 levels).

4. REDIAL function

Lift the handset or press
redial the last dialled number.

5. SPEAKER button

To switch your call to speakerphone, press
the handset. To switch back, simply pick up the handset and
speak as normal. In the speaker state, you can make or
answer a call.

6. PAUSE function

Allows you to insert a temporary pause during the dialling
sequence. For example, dialling an international number
(e.g.:011-886-22-795-1234),
systems will not register the entire number entry without a
pause between the prefix numbers. You may have to dial 011-
REDIAL/PAUSE, dial 888 - REDIAL/PAUSE. This gives the
telephone company's system adequate time to register the
phone number and complete the call.
- Maximum ringer volume
- Low ringer volume
- Ringer OFF
, then press the REDIAL/PAUSE to
some
8
/ /
and hang up
telephone company
).