Initial Programming; To Enter The Program Mode; To Exit The Program Mode; Setting The Language - Uniden 420 Owner's Manual

INITIAL PROGRAMMING

TO ENTER THE PROGRAM MODE

You are now ready to begin configuring the extension using the PROGRAM mode. Press
PROGRAM to enter.

TO EXIT THE PROGRAM MODE

Press END to exit the PROGRAM mode. Going off-hook will also exit the PROGRAM mode. The
PROGRAM mode will also automatically exit after 20 seconds of inactivity.
The PROGRAM options are structured like a tree (see Programming Tree page 39). The
are used to navigate options. The programming tree is a loop that returns to the first option as
you navigate up or down.

SETTING THE LANGUAGE

The default language is English.
1 .
Press PROGRAM .
PROGRAM
:select
2 .
Press the button once.
LANGUAGE
: select
: enter

SETTING THE TIME AND DATE

1 .
While in the PROGRAM mode, press the
TIME/DATE
: select
: enter
2 .
Press the button to enter.
MONTH
01/01 1:00A
: select
SAVE?
3 .
Press the button to enter.
LANGUAGE
= English
: select
SAVE?
4 .
Use the buttons to select the desired
language.
5 .
Press SAVE when done.
LANGUAGE
= English
Programmed!
button until the following screen appears:
10
INITIAL PROGRAMMING
SETTING THE TIME AND DATE (cont.)
3 .
Use the buttons to select the correct MONTH.
4 .
Press SAVE to accept your setting and to advance to the DATE.
5 .
Use the buttons to select the correct date.
6 .
Press SAVE to accept your settings and advance to the HOUR.
7 .
Use the buttons to select the correct hour.
8 .
keys Press SAVE to accept your settings and advance to the MINUTES.
9 .
Use the buttons to select the correct minutes.
10.
Press SAVE to accept your settings and advance to AM/PM.
11.
Use the buttons to select AM or PM.
12.
Press SAVE to accept your settings and advance to DAY OF WEEK.
13.
Use the buttons to select the correct day.
14.
Press SAVE to accept your settings.

SETTING THE EXTENSION ID

1 .
While in the PROGRAM mode, press the
button until the following screen
appears:
EXTENSION NO
: select
: enter
2 .
Press the button to enter.
EXTENSION NO
=22
: select
SAVE?
3 .
Use the buttons to select an
extension between 11 and 22.

SETTING MESSAGE WAITING INDICATOR ON/OFF

The light and display indication can be turned ON and OFF in the PROGRAM MODE. See
page 21.
DAY OF WEEK
= Sunday
Programmed!
4 .
Press SAVE to accept your choice.
EXTENSION
= 11
Programmed!
5 .
Initial programming is now complete. You
can press the PROGRAM button to exit the
PROGRAM mode and begin using the 420
with the factory default settings (see
TELEPHONE OPERATION on pages 21-29)
or you can program additional options.
NOTE:
If more than one extension in a system is
assigned the same ID number, the phone will beep
continuously. Press PROGRAM to reassign a
unique ID number.
11