Setting Relay Preferences - Ultratec Supercom 4400 User Manual

Setting relay preferences

Note: You must turn E-Turbo on before you can program your user
preferences.
1.
Press the options key (hold down the
key).
2.
Press the
plus the letter(s) of any preferences that have been
programmed.
3.
Type the letter(s) of the relevant setting from the following
chart. You can select as many preferences as you want.
Available User Preference Settings:
D Do not dial through
V VCO on
M Male CA
B Braille
X Do not explain Relay C Request calling card
E English language
R French language
2 2-line VCO
For example: If VCO will be used when placing calls through
Relay and you prefer to explain relay yourself, type the letters
"VX" in this menu. Then, the TRS will recognize calls as
being VCO calls and will not explain relay.
Use the
previously programmed preferences.
4.
Press the
the
Return
key until you see RELAY PREFS displayed,
Return
Z Do not type recordings verbatim
H HCO on
F Female CA
A Do not announce Relay
G German language
S Spanish language
key to correct mistakes or to remove
Back Space
key to save the setting and leave options or press
Esc
key to save the setting and go to the next option.
+
Ctrl 9
key and press the
Ctrl
O P T I O N S • 6 7
9