Clearing All Memos Ctrl; Saving A Conversation As A Memo - Ultratec Supercom 4400 User Manual

Clearing all memos
1.
Press the clear key (
(CONVERSATION) on the display.
2.
Press the
3. Press the
display.
4.
Press the
decide not to clear all memos.

Saving a conversation as a memo

You can save your conversation as a memo at any time during or
after a call, but you must do it before you turn off your Supercom
4400. The conversation is recorded from the beginning until you
hang up or tell the Supercom 4400 to stop. The memo stays in
memory until you clear it. The memo can be edited in the same way
as any other memo. Follow these steps to record a conversation:
1. Press the save conversation key (
2.
Type a new memo name and press the
returns to the conversation. You are now recording.
3.
To stop recording at any time, press the
returns to the conversation.
Your conversation is now saved in memo memory and you will see
the name of the memo in the list of memos. You will still be able to
read the conversation in the memo memory even if you clear
conversation memory.
Note that if memo memory does not have room for the whole
conversation, it saves as much of the most recent part as it can and
stops recording.
5 6 • M E M O S
+
Ctrl
+ ). You will see CLEAR
Ctrl 8
to change the setting to MEMOS.
Spacebar
key. You will see CLEAR MEMOS Y/N on the
Return
key to clear all memos. Press the
Y
8
key if you
N
Ctrl +
+ ).
Ctrl 7
key. The display
Return
key. The display
Esc
7