Remote Message Retrieval - Ultratec Supercom 4400 User Manual

Remote message retrieval

Remote message retrieval allows you to use another TTY when you
are away from home or work to call your Supercom 4400 and read
auto-answer messages. You must enter and save a password before
you can use remote message retrieval. The password prevents others
from reading your messages. You can only have one password per
household or office.
Saving a password
Follow these steps to save a password:
1.
Press the options key (
2. Press the
on the display.
3.
Press the
4.
Press the
5. Type a password using up to 8 characters. You cannot
use @ # % & or * symbols. The / character is part of your
password.
6. Press the
7.
Press the
Changing your password
To change your password, choose a new one. If you forget your
password, the Supercom 4400 cannot show it to you. You must
enter a new password by following the steps above.
Reading messages while you are away
Follow these steps to use remote message retrieval:
1. Call your Supercom 4400. Your Supercom 4400 must have
auto-answer turned on when you call.
2.
Wait for the answer memo to end.
3.
Press the
4 8 • A U TO - A N S W E R
Ctrl +
+ ).
Ctrl 9
key until you see CHANGE AA PSWD (NO)
Return
to change the setting to YES.
Spacebar
key. You will see:
Return
key.
Return
key to leave the options.
Esc
key.
Return
9
PASSWORD: /
+
Ctrl 9