If you are notified that your system has failed the qualification test, click the
View Report button to identify which component(s) failed. Once you have
identified which component(s) failed, refer to the Troubleshooting section of this
Quick Installation Guide for further instructions.
Some Windows 95 users may require a necessary Windows component
(Winsock 2) to be installed at this time. Click Next to launch the installation
of this component and follow the on-screen instructions. Once the
installation is complete, you will need to restart the U.S. Robotics
SureConnect ADSL Ethernet Modem installation.
Step 3. Connect the Cables
Connect the Power Adapter
Be sure to only use the included power supply.
Plug the power adapter cord into the "10VDC" jack
at the rear of the modem. Plug the power adapter
into a standard wall outlet. The modem is always
supplied with power, so there is no power switch to
turn on. The "PWR" LED on the front panel of the
ADSL modem will be illuminated if power is being
supplied to the modem. Click Next.
Windows 95 Users
7